Short:        Substitute for IconX
Author:       Jaroslav Pokorny
Uploader:     yaya005 seznam cz - www.yaya005.7u.cz
Type:         util/sys
Version:      2.4
Replaces:     IconX
Requires:     OS3+, CPU 020+
Architecture: m68k-amigaos

----------------------------------------------------------------------------
Freeware compensation System Utilities "IconX" for new processors and graphics cards.

CPU 68020 is minumum for meningful use.                                                                                                                                                                                             

For example, you can run old programs and games
that have problems with CPU 68030 or above, or gfx card.
It is possible to customize the behavior of the processor 68040,
such as processor 68020.

Lets you disable the AGA chipset, as well as utility-type KILLAGA. 

Some games do not run the GFX cards just because you can not open the PAL
screen before the GFX card screen.
(The user then hears the sound of the game, but the screen is still a system.)
This utility can use tooltyp "[PAL]" display screen type PAL first,
so then the game starts correctly.

It allows users to run commands of amigados, so when used correctly
added to the system assigns, set off by CPU cache, prohibit AGA, the screen switches
to PAL mode and then run a game or program.

Archive contains examples of use for older games... 
eg: Superfrog, The Settlers, Slamtilt, etc...


List of internal commands(tooltypes):


   [PAL]           - switch screen to PAL,set LORES sprites
   [NTSC]          - switch screen to NTSC, set LORES sprites
   [CLOSESCREEN]   - screen immediately closes PAL/NTSC                                                                                                                    
                     (otherwise be closed at the end of ToolX)
   [FLUSHMEM]      - "clean up" unused memory from libraries and fonst
                     (performed automatically at startup Toolx)
   [FLUSHCACHE]    - flushes the contents  of all cache  (68020+)
   [INSTCACHE]     - enable instruction cache (68020+)
   [NOINSTCACHE]   - disable instruction cache (68020+)
   [DATACACHE]     - enable data cache (68030+)
   [NODATACACHE]   - disable data cache (68030+)
   [INSTBURST]     - enable instr.burst cache (68030)
   [NOINSTBURST]   - disable instr.burst cache (68030)
   [DATABURST]     - enable data burst cache (68030)
   [NODATABURST]   - disable data burst cache (68030)
   [COPYBACK]      - enable copyback (68040+)
   [NOCOPYBACK]    - disable copyback (68040+)
   [EXTCACHE]      - enable ext. cache (68040+)
   [NOEXTCACHE]    - disable ext. cache (68040+)
   [WRITEBUFFER]   - enable write buffer (68060)
   [NOWRITEBUFFER] - disable write buffer (68060)
   [BRANCHCACHE]   - enable branch cache (68060)
   [NOBRANCHCACHE] - disable branch cache (68060)
   [SUPERSCALAR]   - enable superscalar  enforcement instruction (68060)
   [NOSUPERSCALAR] - disable superscalar enforcement instruction (68060)
   [68000]         - sets the status of the mode of 68000
   [68020]         - sets the status of the mode of 68020
   [68030]         - sets the status of the mode of 68030
   [68040]         - sets the status of the mode of 68040
   [68060]         - sets the status of the mode of 68060
   [SETCLOCK]      - updates the system clock time by backup
                     (otherwise be closed at the end of ToolX)
   [DELAY]         - 1s pause
   [REBOOT]        - system restart (Use with caution!)
   [FORBID]        - disable multitasking (Use with caution!)
   [PERMIT]        - enable multitasking
   [KILLAGA]       - disable AGA chipset, initialization sprites 
   [NOVBR]         - setings VectorBaseRegister at adress 0
   [MESSAGE]       - display message (text in next line ToolType)
   [WARNING]       - display question (text in next line ToolType)
   [RUNSELF]       - runs program with the same name as an icon
                     where ToolX  was invoked(uses this function for rename
                     run file withow interfere his tooltyp)
   [RUNSELFBACK]   - via [RUNSELF], but program runs in background
                     with -1 priority (Imagine, LightWave ect.)
   [RUNSELFFRONT]  - via [RUNSELF], but +1 priority and forderground(MPEGA)
   [REPEAT]        - repeat all commands from start
   [QUIT]          - quit all commands and ToolX
   cd xxx          - set the path xxx  as the current path
   ;xxx            - note ('xxx' ignore it)
   (xxx)           - inactive command 'xxx'

-------------------------------------------------------------------------------------------
Translated by Google and Ya.
Cesky popis prikazu je v archivu.
-------------------------------------------------------------------------------------------