Short: AGA Software Compilation. Disk 2, rev.3 Architecture: m68k-amigaos ************************************************************************* Welcome to the AGA software compilation Disk Two. ************************************************************************* All programs will work on AGA/KS3.0 equiped Amigas, some will work with ECS/KS3.0, ECS/KS2.04 or (even!) OCS/KS1.3 Amigas. All doc files have icons but not all programs were supplied with icons so I did not add any. More (the standard text reader) must be in the WorkBench Path to view the docs (ie if you are reading this then it probably is!). More is found in the SYS:Utilities drawer. AmigaGuide documents have their tooltype set to MultiView. If you only have KS2.04 it will need to be changed to AmigaGuide (after you install it of course!). The "*** Requires:" field outlines the MINIMUM requirements of Operating System Software and/or Amiga Hardware required. Also, this disk is formatted with the FastFileSystem. Only KS2.04 or greater supports FFS on floppys, so don't wonder why the disk is unreadable on a KS1.3 or less system! I hope you find some of these programs useful. Thanks must go to the various authors of the programs for getting AGA supported software out so quickly. Copyright remains with the authors of the software and not with me. Usual disclaimers apply. GBLANKER: (v37.11) A future-compatible/expandable screen blanker with AGA support. NOTE: 030 versions have been removed due to space restrictions. *** Requires: KS 2.04 or greater. DEGRADER: (v1.30) Get brain dead programs to work. With Kickstart 3.0 support. *** Requires: Any Amiga(!). FORCEMONITOR: (v3.10) ForceMonitor patches OpenScreen and OpenScreenTagList, to open most screens in a given displaymode, ie. promote selected screen types to one other screen type. Highly configurable. Nice GUI. Successor to ForceVGA on Disk One. *** Requires: KS3.0. MANDELMANIA: (v4.1) Yet another Mandelbrot exploration program. AGA support. Creates ANIM's too! *** Requires: WB2.1 or greater. PALETTEREQ: A 24-bit palette requester, similar in operation to 1.3 Palette and 2.04 Colors but with full AGA support. Source included. *** Requires: AGA. POV-RAY: An update for this popular raytracer to the A4000 and AGA HAM8. This is not the full distribution of this program. No docs are included; they must be obtained from the original distribution available from various sources. Source code included; maybe someone can compile '030 and '020 AGA versions? *** Requires: MC68040 and AGA Chip Set. PROMOTOR: (v1.09) The Promotor allows you to promote screens to any mode you wish. You can give instructions for specfic screens, give general promotion rules, promote depending on the mode requested by the program... etc. etc.... Configurable beyond belief. Minimal GUI. *** Requires: KS3.0/AGA Compiled by Craig Arnoldt. InterNet: derf@greybox.ucnv.edu.au i897515@redgum.ucnv.edu.au OR derf@ironbark.ucnv.edu.au SnailMail: 205 King Street, Bendigo, Vic., Aust. 3550. Hardware: A4000, 14MB RAM, 120MB HD, NEC3D monitor. 2/4/93 - Release 1. 9/4/93 - Added ForceMonitor v3.8. 14/4/93 - Added SetNewLook, and Blanker. 22/4/93 - Added Promotor. 30/4/93 - Upgraded Promotor from 1.00 to 1.01. Upgraded ForceMonitor from 3.8 to 3.10 20/5/93 - Added MandelSquare v1.6. Updated Promotor from 1.01 to 1.04. Updated Blanker from 1.0 to 2.2. 26/5/93 - Updated Blanker from 2.2 to 2.3. 28/5/93 - Release 2. 12/6/93 - Updated Promotor from 1.04 to 1.06. 4/10/93 - Updated Promotor from 1.06 to 1.08. 8/12/93 - Updated GBlanker from 2.3 to 37.11. - Updated Promotor from 1.8 to 1.9. - Deleted MandelSquare and SetNewLook. - Added MandelMania 15/12/93- Release 3.