Short: Hardware monitor system Author: Denny Menato Uploader: bac marina dei unipd it Type: dev/moni Requires: any version of AmigaDos, chipset AGA HAS TO BE SWITCHED OFF Architecture: m68k-amigaos (I have tried it on 68000 and 68020 machines) Version: 1.0 beta (PAL version) Giga Monitor by Denny Menato This program is GIFTWARE so if you use it you have to send me at least one of this contributions: - 3.5 Disks (with demos/shareware progs/asm sources etc..) - Amiga's magazines - Amiga's documentations - Amiga's books - any other thing related to Amiga at the following address: MENATO DENNY VIA SILVIO PELLICO, 29 35031 ABANO TERME (PADOVA) ITALY email: bac@marina.dei.unipd.it PS. Turn off AGA chipset by using the boot menu PPS. You may send suggestions and I will try to put them in a new version PPPS. I'm not responsable for any type of damage on your HARDWARE or SOFTWARE, use this program on your own risk INTRODUCTION: This is a very strong monitor that allow you to debug your programs. Remember that this program DOESN'T use systems routines, then it isn't 100% stable and then it may CRASH your AMIGA at any time!!! To activate GigaMonitor you have to press the HELP key; NEVER activate GigaMonitor while your I/O DEVICES are working!!!!!! ------------------------------------------------------------------- >>>>>>>>>>>>>>>> USE THIS PROGRAM ON YOUR OWN RISK <<<<<<<<<<<<<<<<<<<< You can copy this program to your friends but you have to include this documentation, furthermore you MUST NOT to change any part of the program and documentation. ----------------------------- GIGAMONITOR commands: d MC 68000 disassembler - d(address) m Show/edit memory as bytes - m address n Show/edit memory as ASCII - n address x exit - x r Show/edit processor registers - r(reg value) destroy exit and destroy GigaMonitor - destroy unfreeze Try to unfreeze diskdrives if you have stopped them activing GigaMonitor while they were working - unfreeze ----------------------------- GIGAMONITOR key commands: TAB insert spaces ESC escape any command F1 CLR + cursor home F6 cursor priority over bitplanes SH F6 bitplanes priority over cursor F10 Switch screen POWER-LED is off = ready to execute commands! Use cursorkeys in combination with shift too -----------------------------